FloorTags
Premium Quality Curly Vinyl Mat
User Guide
We hope you enjoy your purchase and use it on many happy occasions. This user guide has been thoughtfully prepared to help you get the best from your product.
Cleaning Instructions:
-
Mats are to be removed from the original floor surface and placed flat on a clean area.
-
Regular vacuuming is essential – daily in high-traffic zones and weekly in less busy areas, using a power head with a beater bar.
-
Flip the mat over and use the beater bar to dry vacuum the back side.
-
Clean any dirt/debris from the floor (sweep, vacuum, damp mop, etc.).
-
-
For heavy soil, extract clean or hose off as needed.
-
Scrub the mats with a brush and a low-foaming general-purpose cleaner, then rinse thoroughly with a hose.
-
​Use a mix of mild detergent OR non-butyl degreaser with hot water.
-
Employ a high-pressure hose (not exceeding 500 psi) with hot water (maximum 120°F) to remove oils from the mats.
-
Avoid using steam, butyl-containing degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
-
-
Hang mats on a rack to dry or lay them on a flat inclined surface to dry completely.
-
Replace the mats on a clean, dry floor.
IMPORTANT: (Unless your mat has been tested for use with these chemicals):
-
AVOID using BLEACH or any BUTYL-BASED DEGREASER, as this will void the product warranty.
-
Exposure to chemicals other than those designed for the mats may adversely impact the product's longevity.
-
Improper cleaning, handling, folding, or using commercial dishwashers for cleaning mats will reduce their expected lifespan and may void the warranty.
-
Vinyl-backed carpet mats may naturally wear over time. Replace them when chips, cracks, or curls inhibit their function.
SHEDDING OR FUZZING: Shedding or fuzzing is not a defect but a common condition in new fabrics, which will cease after several vacuuming sessions.